Consulting Hotline0755-2728-6106
Phone number13312911695
Consulting Hotline0755-2728-6106
Phone number13312911695
Your present position：Home > Product > Glue filling machine > Hard light bar filling machine
Hard light bar filling machineCategory：Hard light bar filling machine
Hotline:0755-2728-6106
| Application: Hard light bar, wall washer, King light and other lines of irrigation lamps
| Principle of operation：
1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4. Movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory.
5, Z axis up and down movement with ball shaft screw rapid response.
6, glue machine automatic ratio
| Parameters:
|
1 |
Proportion with glue |
5: 1 to 1: 1 epoxy resin |
|
2 |
Mixing method |
Dynamic mixing |
|
3 |
Machine travel |
1200*480*100mm ,itinerary can be customized according to the actual needs of the customer |
| 4 |
Counter tops |
1650*600mm |
|
5 |
Programming mode |
Teaching programming |
|
6 |
Dimensions |
1650*1400*1450mm |
|
7 |
The main pump (A pump) |
9cc/turn |
|
8 |
Attached pump (B pump) |
2.4cc/turn |
|
9 |
Tank Capacity |
A Cylinder 25L，B Cylinder 25L Full vacuum |
|
10 |
A plastic flow |
2-8g/s |
|
11 |
A plastic head |
Standard single head，Number of head according to the product |
|
12 |
Input pressure |
0.5-0.7Mpa |
|
13 |
Machine power |
1000W |
|
14 |
Supply voltage |
AC220V±10%,50-60HZ |
| Device Configuration:
|
1 |
Control System |
Xinjie PLC + motion control card +7.2 inch Kunlun on-state touch screen |
|
2 |
Software system |
Zhonghu R&D independently, a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function |
|
3 |
Operate motor |
YAKO Original motor |
|
4 |
Metering pump body |
Precision adjustment wear type |
|
5 |
Cut off the system |
Zhonghu R&D independently |
|
6 |
Mixing device |
Zhonghu R&D independently |
|
7 |
Vacuum |
Negative pressure to bubble |
|
8 |
Frame material |
A3*3mm manufacture |
| 9 |
Sliding device |
Taiwan HIWIN |
| 10 |
Mixing tube cleaning |
Gas and liquid cleaning |
| Features:
|
1 |
Friendly and concise interface |
Foolproof operation program design, simple operation, practical,
ordinary workers can learn all operating methods in 5 minutes |
|
2 |
High-end imported electronic control system |
The main electrical part of the wiring, dust, anti-static, have reached foreign standards |
|
3 |
Glue detection feedback function |
The drum part is equipped with low level alarm function, timely reminds the glue
|
|
4 |
Glue filter four protection |
Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline |
| 5 |
Large work surface |
Can be placed at the same time a number of products, the machine automatically continuous operation, with more efficient |
|
6 |
Equipment running more smoothly |
The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy |
|
7 |
High precision mechanical pump body |
Precision adjustment wear type |
| 8 |
Automatic mechanical agitation |
AB glue mixing using dynamic, mechanical mixing, stirring speed 0-3000rpm adjustable
|
| 9 |
High precision operation |
The use of double-layer linear slide and high-precision balance block to ensure the accuracy of operations |
| Characteristics of Three-axis Movement:
1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.
| Main features of machine：
1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
| Technical features of machine:
1, the proportion of any adjustable glue: not limited to the use of the ratio of 1: 1 of the glue, for this technical bottleneck we first break.
2, choose any glue supplier: because the machine has a smart matching glue function, not limited to 1: 1 glue.
3, for enterprises to save costs: a machine can replace multiple employees, a year can save the money out of the machine.
4, for enterprises to reduce the burden of management and recruitment. Reduce the burden on employees, administrators, management can focus more on the management of production; personnel recruitment staff also eliminates the "difficult" problem, a lot of hidden costs to reduce.
5, the company has a number of experienced design (10 years of plastic irrigation design and development experience) for the future maintenance of the machine, upgrade escort. In the production process can also give some suggestions.
6, the company product positioning clear. And the market of other companies with the same type of strategy is different, I Secretary adhering to the "all for the customer, for all customers, for all customers," the spirit of Seiko fine carving, high quality products, higher positioning market, relying on customer reputation based on the market. Do not seek short-term interests.
Consulting Hotline0755-2728-6106
Phone number13312911695
Scan, focus on us
